User Manual

26 of 34 Talk-A-Lert III Manual Rev. 2/ 3/ 2014
Please note that there must always be an ID 0, which is the default Listener ID. To add
an additional Listener ID, select <add> from the drop down menu.
 Auto Start Listener: When the system boots the listener will automatically start up.
 Modem Speed: 2400—DO NOT CHANGE
 Modem Port: COM port being used with EB-300 Base Station (D=1)
 Station ID: Station ID that this listener is running on. This is for identifying which
guard was at the station. (D=0)
 Timer Interval: Frequency which the listener updates its status. This status is used
only for the task bar display. (D=60)
 Incoming Buffer Length: Number of characters we expect from the serial port
when an incoming call is received. Once we get this number of characters we
determine the ID by comparing the string after the first *9 with the string after th e
second *9. (D=32)
 Print to Default Printer: If this box is checked, every time an incoming call is
received a report will be automatically printed to the printer specified as Default
Printer in the Printer Control Panel.
Note: You must have a printer installed and specified as default for Talk-A-Lert to
work properly.