WPM-300 Wireless Monitoring System m Preface Dear Customer, Thank you for purchasing Stark WPM-300 Wireless Monitoring System. In order to better understand and use the product, please read this manual carefully. if you have any questions or suggestions, please contact our local dealer. um Features « A wireless monitoring system tailored for instrument/stage monitoring and simultaneous interpretation, « UHF wireless transmission, PLL (phase-locked loop) technology, stable and reliable performance.
WPM-300 Wireless Monitoring System m Package Contents WPM-300 (Set) Transliterate cover rear rears sss sea se ss sees 1 pc Body pack Receiver «oer 1pc IN-Ear MONITORS ror lpr Silicone Ear Tips Dry Battery. #3.5mm Audio Cable 1pc RCA Audio Cable ‘1pc 3.5mm to &.
WPM-300 Wireless Monitoring System m Function Descriptions Transmitter: ® Power Switch: flip to “| » position to power on, root “0” position to power off the device. @ LED Screen: displays current working channel, ranging from 10 channels, CHOC to Chloe. @ Headphone Knob: adjust headphone port output volume. @ Input Connector: one 3.5mm stereo audio input, for connecting external audio source; one pair of RCA audio inputs, for connecting external audio source.
® 3.5mm Headphone Output: for connecting headphones to monitor audio output. (@ Power Inlet: for connecting power supply via an adapter with a specification of 12v/300maA, Antenna Connector: for connecting external antenna to enhance signal reception. 00s smash a SET oO ! Body pack Receiver: ®@ Power Button: press and hold for 2s to power on/off. @ LED Indicator: power indicator, stays green while powered on and battery level is normal, or stays red when battery is low.
WPM-300 Wireless Monitoring System (® LED Screen: displays current working channel, ranging from 10 channels, CHO to Chloe. Displays current battery level in a 3-bar meter. Displays wireless connection status; signal indicator stays on when connected successfully, flickers during weak signal, or turns off when disconnected. ® External Antenna: 1/4 wavelength antenna to enhance the signal transmission distance. (D Headphone Jack: used to connect headphones for sound monitoring.
WPM-300 Wireless Monitoring System HB Operation Instructions Sync Frequency The transmitter and the receiver are already paired before shipping out and will auto connect to each other. Follow below re-pairing or frequency change steps only if there is signal interference. 1. Turn on transmitter and receiver. 2. Press SET on transmitter to change frequency channel. 3. Press SET on receiver to change to the same frequency channel as the transmitter.
