P1翻页笔使用说明 P1 Presentation Remote User's Manual
P1 翻页笔 前言 尊敬的用户： 感谢您选购得胜P1翻页笔，为了您能 够更好的了解使用本产品，建议您在使用 前仔细阅读本说明书。 若存在有疑问或者您有宝贵的建议，可通 过拨打得胜官方服务热线 400 6828 333 或微信扫描二维码关注得胜官方 公众号与我们联系。 产品特性 • 采用2.
P1 翻页笔 • 迷你机身，内置接收器，磁吸式设计， 可存储在演讲笔中，会议，讲座一支笔轻 松搞定。 适应范围 课堂教学、授课、培训、演讲等各种PPT展 示场合 产品配置 翻 页 笔 … … … … … … … … … … 1支 USB接 收 器 … … … … … … … … … … 1个 绒 布 袋 … … … … … … … … … … … 1个 7号 电 池 … … … … … … … … … … … 1节 说 明 书 … … … … … … … … … … 1份 技术参数 发射器: • 遥控方式：无线射频2.
P1 翻页笔 • 电池：1节3A电池（7号） • 3A电池：1.5V • 单机重量： 约25g • 产品规格：约138.1X24.2X14.1mm 接收器： • 操作系统：Windows/Android/ Mac OS/Linux • 接收尺寸：20X13X5mm • 接收重量：1.
P1 翻页笔 功能键 功能操作说明 电源开关 指示灯 超链接键 正常工作时， 指示灯提示正在工作 单击：Tab 双击：Enter 长按：Alt+Tab 上翻页按键 短按：上翻页 长按：全屏播放/退出全屏 （播放PPT时） 下翻页按键 短按：下翻页 长按：黑屏/退出黑屏 （播放PPT时） 激光束按键 按下激光射出， 松开按键关闭激光 音量+ 点按逐渐增大音量 音量- 点按逐渐减小音量 打开PowerPoint或Keynote软件，翻页功 能需要在全屏的状态下才能正常使用， WPS部分版本功能不兼容 4
P1 翻页笔 使用说明 一、电池安装： 产品使用一节7号（AAA） 电池供电，打 开电池盖，按照电池的正负极方向正确装 入电池，再把电池盖装回原来位置即可。 电池使用注意事项： ① 请确认电池的负极（-）和正极（+）是 否安装正确； ② 请勿将用尽或损坏的电池留在本产品 中，避免电池久置漏液； ③ 长期不使用本产品，请将电池取出； ④ 当本产品无功能或遥控距离缩短时，请 更换新的电池。 二、安装USB接收器： 本产品采用一体式设计，接收器内嵌于产 品之内。如图所示，将翻页笔尾部的接收 器取出，然后把USB接收器插入电脑 USB接口，同时Windows操作系统右下角 会显示“正在安装设备驱动程序软件”，待 系统识别并显示“设备准备就绪”时，表示 USB接收器安装完成。 5
P1 翻页笔 将翻页笔尾部的接收器取出 把USB接收器插入电脑USB接口 故障排除 1.请确认电源 遥控器 无法开机 电池原因 开关是否打开 2.电池电量低 请更换电池 1.请确认USB 无法识别 接收器 电脑USB 接口故障 接口是否正常 2.
P1 翻页笔 安全警示 为避免电击、高温、着火、辐射、爆炸、 机械危险以及使用不当等可能造成的人身 伤害或财产损失，使用本产品前，请仔细 阅读并遵守以下事项： 1.本产品具有产生激光束的功能，切勿将 激光直射眼睛，以免造成眼睛不适或损 伤； 2.使用中若发现有异常（如冒烟、异味 等），请立即关闭电源开关，然后将产品 送售后服务网点检修； 3.本产品及附件都应放置在室内干燥通风 处，请勿长期存放在潮湿、灰尘多的环 境，使用中避免靠近火源、雨淋、进水、 过度碰撞、抛掷、振动本机及覆盖通风 孔，以免损坏其功能； 4.使用该产品时需遵守相关安全规定，法 律法规明确禁止使用场合请勿使用本产 品，以免导致意外事故； 5.
P1 翻页笔 关于图标含义解释 此符号表示，根据WEEE指令 (2012/19/EU)和国家法律，由于 这种类的废弃物会有潜在的有害物质，可 能对环境和人类健康产生负面影响，所以 本产品不应与您的家庭垃圾一起处置，应 将本产品应交由授权的电气和电子设备 （WEEE） 回收站回收。同时，您在正确处 理本产品的同时将有助于自然资源的有效 利用。如需了解更多有关您可以在何处放 置废物回收设备的信息，请联系您当地的 城市办事处、废物管理局或家庭废物处理 服务部门。 8
P1 翻页笔 关于本说明书 本说明书中内容符合截止印刷之日的技术 规格。由于得胜公司会不断改进产品， 本 说明书可能不符合您的特定产品的技术规 格。要获取最新版说明书，请访问得胜官 网，然后下载说明书文件。技术规格、设 备或另售的附件在各个地区可能有所不 同，如有问题请与当地得胜销售网点确 认。如需更多支持和深层产品信息，请浏 览得胜官方网站： https://www.takstar.
P1 Presentation Remote Preface Dear Customer, Thank you for purchasing Takstar P1 Presentation Remote. In order to better understand and use the product, please read this manual carefully. If you have any questions or suggestions, please contact our local dealer. Features • 2.4GHz wireless technology, ready for use once plugged in. • Volume control, slide control, full screen mode and slideshow play. • Class 3R red laser with 100m range, up to large conference requirements.
P1 Presentation Remote • Comfortable silicone buttons, aesthetically pleasing as well. • Mini design with a magnetic dock that stores the USB receiver. One remote to get the show started. Applications Various PowerPoint occasions during lecture, training and presentation.
P1 Presentation Remote Specifications Transmitter: • Control Method: wireless RF 2.4GHz • Use Distance: above 30m • Laser Wavelength: 650nm • Laser Type: Class 3R laser • Laser Distance: ＞200m • Laser Power: ＜5mW • Laser Color: red • Battery: 1 × AAA battery • AAA Battery: 1.5V • Weight: about 25g • Dimensions: about 138.1*24.2*14.1mm Receiver: • Operating System:Windows/Android/ Mac OS/Linux • Dimensions: 20*13*5mm • Weight: 1.2g Note: The above data are measured by Takstar laboratory.
P1 Presentation Remote Function Descriptions ② Indicator Light ④ Page Up ③ Hyperlink Button ⑦ Volume + ⑧ Volume − ① Power Switch ⑤ Page Down ⑥ Laser Button Operations Power Switch Move upwards/ downwards to power on/off respectively. Indicator Light Indicator lights up during normal operation.
P1 Presentation Remote Page Up Short press: previous pageLong press: enter/exit full screen (during slide show) Page Down Short press: next page Long press: enter/exit black screen ( during slide show ) Laser Button Press and hold to activate the laser pointer. Volume + Tap to gradually increase volume level. Volume − Tap to gradually decrease volume level. Open PowerPoint or Keynote, page turning only works properly in full screen mode.And some WPS Office versions are incompatible.
P1 Presentation Remote Operation Instructions Battery Installation: The unit is powered by 1 × AAA battery. Remove the battery compartment cover, insert the battery into the battery holder following the polarity instruction, and put the battery compartment cover back in position. Note: ① Make sure to install the battery by observing the correct polarity. ② Do not leave bad or exhausted battery in the product.
P1 Presentation Remote USB Receiver Installation: The remote features integrated design with built-in storage slot for the receiver. Remove the receiver from the bottom of the remote, then connect the USB receiver to a USB-A Port on the host computer. In Windows system, a pop-up should appear at the bottom right of the desktop saying “Installing device driver software”. When the installation completes, you will see “Ready to use”, meaning the USB receiver is successfully installed.
P1 Presentation Remote Troubleshooting Issue Cause Solution Cannot turn on the remote Power supply issue 1. Make sure the power switch is on. 2. Battery level is low, replace with a new one. 1. Check if the Cannot USB port Computer recognize USB port malfunctions. the malfunction 2. Try other receiver USB ports. Failed connection Does not between work the remote properly and receiver Please contact our local aftersales service outlet.
P1 Presentation Remote improper use, please read and observe the following items before use: 1. This product generates a laser beam. Do not point the laser towards eyes to avoid eye discomfort or injury. 2. If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from power source, then send the product to the after-sales service outlet for repair. 3. Keep this product and its accessories in a dry and ventilated area.
P1 Presentation Remote 5. Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local aftersales service outlet. Label Meanings This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (2012/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (WEEE).
P1 Presentation Remote the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service. About This Manual This manual contains up-to-date technical specifications as of printing.
