User Manual

Bottom Panel

① Gain Selector: the default gear is "0" where gain setting is off; set to

"+10dB" position to boost pickup sensitivity for farther distance pickup;

set to "-10dB" position to lower pickup sensitivity for close range use.

Select according to your use scenario.

② Low-Cut Switch: when set to "0", mic is in normal sound pickup status;

when set to "80", it filters out breathing sound and plosives; when set to

"150", it filters out low-frequency environmental noise below 150Hz (e.g.,

traffic, air conditioner and vibration noise).

Gain SelectorLow-Cut Switch

MS300 Conference Microphone