User Manual

2
EKX-5A
Part II. Operation Instructions
2.1 Connection and Power-On
Please make sure that the power of this device and all amplifiers is turned off, then follow the
below steps for quick connection and power-on.
1. Connect this device to the audio system.
Audio Input Device Audio Input Device
Recording Device
Optical Audio Input
Power Amp
Power Amp
Main Speaker (R) Main Speaker (L)
Center Speaker
Powered Subwoofer
Surround Speaker (R) Surround Speaker (L)
Mic Input Mic Input Mic Input
On Front Panel
2. Connect to power supply.
3. During the afore steps, turn all the volumes of power amplifiers to the minimum before
connecting them to power supply.
4. Gradually increase the power amplifier volume to an ideal level without signal clipping.
Note: To protect the speakers and ensure their performance is not hindered, it's recommended
that you adjust the volume level structure of the audio system and tweak the settings for
crossover, equalizer and compressor/limiter.
Professional Digital Audio Processor