User Manual

DG-U100
17
6. Conference Mode
Rotate the knob to enter the conference mode settings, move the cursor to the box area in Figure ⑨,
press the knob to switch the conference mode between "FIFO" or "No DLGT".
7. PTZ Camera Connection
7.1 The CU supports PTZ camera control protocols including Sony Visca, Pelco-P and Pelco-D. The
following figure is the pin connection diagram for an original SONY D70 camera
The above connection diagram is for reference only. Please see the pin definition of the PTZ
camera used for actual application.
Camera Control Schematic
Flip：
Sony Visca
Flip：
Pelco-P
Flip：
Sony Visca
Flip：
Sony Visca
Flip：
Sony Visca
Flip：
Sony Visca
Flip：
Sony Visca
Lan g u a g e
Mod e : F IFO
Gamera Tracking:
1:
2:
3:
4:
5:
6:
7:
Figure ⑨
VISCA RS-422
Pin No.
Function
1 TX D IN+
2 TX D IN-
3 RXD IN+(RS485+)
4 RXD IN-(RS485+)
5 GND
6 TXD OUT+
7 TXD OUT-
8 RXD OUT+
9 RXD OUT-
Wiring
Pin No.
Function
1 TX D IN+
2 TX D IN-
3 RXD IN+(RS485+)
4 RXD IN-(RS485+)
5 GND
(HD)
Note
1 2 3 4 5 6 7 8 9
Wireless Conference Microphone System
RS 422 and RS 232 cannot be
used at the same time
1 2 6