User Manual

SY N
Vol 26:
Cha.irman11
DG-U100
16
4. Channel Input/Output Volume, Unit Gain Control
When the channel frequency pairing is complete, you can adjust the input/output volume and unit
microphone gain to a desired level.
Rotate the CURSOR knob to move the cursor onto the boxes in Figure ⑥, and start adjusting the
input/output volume or gain level respectively, following similar steps in Adjust Frequency. When
the gain level is changed successfully, the gain level will briefly appear in the red box area on the
mic unit screen, as shown in Figure ⑦.
5. Channel EQ, Effects, Feedback Suppression
After the above steps, you can set the corresponding EQ, effect and feedback suppression according
to actual needs. Rotate the knob so that the cursor falls on the box in Figure ⑧, press the knob to
enter the setting interface:
640.00MHz
11
Figure ⑥
A
Output Volume:40
TxGa.in:06
发言代表 无
Ga
04
会议中
in:
主席
641.00
315.00
11
Figure ⑦
640.00MHz
11
Figure ⑧
A
SY N
Vol 26:
Cha.irman11
TxGa.in:06
Note: Press the rotary button to check and enable the corresponding function
Echo:
Excite:
EQ:
25Hz
40Hz
63Hz
100Hz
0
0
0
0
160Hz
250Hz
400Hz
630Hz
0
0
0
0
1KHz
1.6KH z
2.5KH z
4KHz
0
0
0
0
6.3KH z
10KHz
16KHz
0
0
0
Default:
A
64 0 .0 0 MHz
Vol: 2 6 Sque a l：
Wireless Conference Microphone System