User's Manual

ManualsBrandsTAKSTAR ManualsAudio EquipmentCS-200 Speakerphone

Table Of Contents

• Omni-directional speakerphone designed for remote conference/

learning/training.

• Full-duplex microphone & speaker combo, record and playback

simultaneously.

• 4 microphone arrays, 360° coverage, up to 5m vocal pickup range.

• Automatic vocal location detects and focuses on the speaker.

• Coupled with intelligent algorithm for automatic echo cancellation

for clear sound.

• Compatible with various audio/video communication software,

connects via Wireless or USB mode.

• Easy touch control prevents mechanical noise from conventional

switch.

• Portable, driverless, plug and play anytime, anywhere for remote

office needs.

• Powerful lithium-ion battery inside lasts for around 10hrs of use.

Dear Customer,

Thank you for purchasing Takstar CS-200 Speakerphone. In order

to better understand and use the product, please read this manual

carefully before use.

If you have any questions or suggestions, please contact our local

dealer.

Preface

Features

TAKSTAR CS-200 Speakerphone TAKSTAR CS-200 Speakerphone TAKSTAR CS-200 Speakerphone TAKSTAR CS-200 Speakerphone TAKSTAR CS-200 Speakerphone TAKSTAR CS-200 Speakerphone TAKSTAR CS-200 Speakerphone TAKSTAR CS-200 Speakerphone TAKSTAR CS-200 Speakerphone TAKSTAR CS-200 Speakerphone

② Ring Indicator: displays volume/ battery level/ mute status/

pickup direction, based on device work status.

③ Volume Up “+”: tap to increase volume, or press and hold to

increase rapidly.

④ Volume Down “−”: tap to decrease volume, or press and hold to

decrease rapidly.

⑤ Mute Button: tap to enable/disable microphone.

⑥ Mode Button: tap to switch between Wireless mode or USB mode.

Under Wireless mode, press and hold for 2s to enter device pairing mode.

Press and hold for 5s to reset Wireless function and clear all pair data.

⑦ Status Indicator: blue under Wireless mode, or white under USB

mode.

⑧ Answer Call Button: tap to answer/end call; press and hold to reject

incoming call.

⑨ Data Port: connects to a computer for data transfer and power supply;

or connects to a charger with output power ≥ DC 5V 1A. (the charger

must have compatible 5V output.)

⑩ Charging Indicator: red while charging, green when fully charged.

Function Descriptions

Operation Instructions

PC/MAC

1. Connect the speakerphone to computer USB socket using a USB

cable, (speakerphone will auto charge), USB data transfer will

start once the computer automatically recognizes the device and

completes driver installation, in which case the status indicator will

light up in solid white.

Package Contents

Video conference, distance education, remote training.

Note: The above data is measured by Takstar laboratory, and

Takstar has the final interpretation right!

Applications

Specifications

Speakerphone

1pc

Carrying Case

Data Cable

1pc

User Manual

1pc

Smartphone/Tablet

1. Upon first use of Wireless mode, the status indicator flashes blue

while searching device to pair.

2. Search device to pair in your smartphone/tablet Settings, wait

until “TAKSTAR CS-200” is discovered, then tap on it to connect. Once

connected successfully, the indicator will light up blue.

3. Open your videoconference or instant communication software to

start network conversations.

Note: The speakerphone will automatically reconnect to previously

paired device.

Press and hold Mode Button for 2s to enter pairing mode.

3. Open your videoconference or instant communication software

to start network conversations.

1.Please check if the power of the connected equipment matches

with that of this product before operation. Adjust the volume to

proper level during operation. Do not operate at over-power or

high-volume level for extended time to avoid product malfunction

or hearing impairment.

2.If there is any abnormality during use (e.g., smoke, strange odor),

please kill the power switch and unplug from power source, then

send the product to the local dealer for repair.

3.Keep this product and its accessories in a dry and ventilated area.

Do not store in a humid or dusty area for extended time. Keep away

from fire, rain, liquid intrusion, bumping, throwing, vibrating, or

from blocking any ventilation openings, to prevent malfunction.

4.The product must, when installed on walls or ceilings, be fixed

firmly in place at adequate strength to prevent from falling.

5.Please abide by safety rules during operation. Do not use the product

in places prohibited by laws or regulations to avoid accident.

6.Do not disassemble or repair the product by yourself to avoid injury.

If you have any questions or require any services, please contact our

local dealer.

To avoid electric shock, overheat, fire, radiation, explosion, mechanical

risk and injury or property loss due to improper use, please read and

observe the following items before use:

Safety Instructions

• Speaker Output Power: 3W

• Speaker Frequency Response: 20Hz-20KHz

• Number of Mic: 4 microphone arrays

• Mic Polar Pattern: omni-directional (360° pickup)

• Mic Frequency Response: 50Hz-16kHz

• Mic Sensitivity: -26dB

• Mic Distortion: ≤1% at 1KHz

• Connection: USB2.0/Wireless

• Sample Rate: 96kHz

• Bit Rate: 26bit

• Wireless Range: 10m

• Duplex Audio: supported

• Echo Cancellation: supported

• Mic Array Noise Cancellation: supported

• Vocal Location: supported

• Power Supply: 3.7V/2600mAh li-ion battery

• Charging Spec: 5V/1A

• Charging Time: approx. 3hrs

• Battery Life: approx. 10hrs

① Power Switch: press and hold for 1s to power on/off; when

powered on, tap to display current battery level.

2. PC: set TAKSTAR CS-200 as the default device for both Playback and

Recording in your system sound settings.

USB cable

macOS: select TAKSTAR CS-200 in both Input and Output tabs

under System Preferences – Sound.

①

③

④

⑤

⑥

⑧

⑦

⑩

②

⑨

This manual contains up-to-date technical specifications as of printing.

However, this manual may not contain specifications conforming to

your particular product since Takstar is constantly improving its

products. For the latest version/more information, please visit our

website: https://www.takstar.com/.

Specifications, devices or accessories available may vary from region

to region. If you have any questions, please contact our local dealer.

About This Manual

This icon indicates that the product meets the 3C certification

requirements of China Compulsory “ Product Certification”.

According to the test results obtained based on RL2004

/108/EG (Electromagnetic Compatibility Directive) and

RL2006/95/EG (Low Voltage Directive), this product complies

with the limits specified in the European Community EMC

(Electromagnetic Compatibility) Directive, an integration of relevant

laws from its member states.

This symbol indicates that, according to WEEE (Waste of

Electrical and Electronic Equipment) Directive (2012/19/EU)

and national laws, this type of waste should not be discarded

along with your household waste, as it contains potentially hazardous

substances that may pose a negative impact on the environment

and human health. It should be handed over to an authorized

WEEE collection facility for recovery and recycle. By doing so, you

will be helping effective utilization of natural resources. For

more information on disposal of WEEE products, please contact

your local municipal office, waste management bureau or household

waste disposal service.

Label Meanings

5. The battery must not be exposed to sunlight, fire or other

overheating environments.

6. There is a danger of explosion if the battery is replaced

incorrectly. Only the same or equivalent type of battery can

be used for replacement.

7. The product is sold without a power adapter. If you use a

power adapter to supply power, you should purchase and

use a power adapter that has obtained CCC certification and

meets the standard requirements.

NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can

radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for

help

Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to

operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.