Operation Manual

8
Mounting The Navigation Set In A Car
Attention! Only fix the holder for the navigation system to the windscreen, if it does not impede
the view. Should this not be possible, Then mount the holder with the enclosed suction plate in
any way that will allow
peril-free and safe operation.
Installation Of The Holder Of The Navigation System
● Hint: If you want to fix the holder to the wind screen, then you can skip steps 1 and 2.
1. Remove the protective foil from the sticky side of the suction plate.
2. Fix the suction plate to a suitable location on the dashboard. Take care, that the surface of
the dashboard is clean and press the suction plate strongly onto the surface.
● To obtain a strong and secure hold the suction plate should not be used for 24 hours.
3. Mount the car holder to the flexible neck. Note the labels on the flexible neck. The arrow
labeled CLOSE must point in the direction of the fixture. The connection closes with a
noticeable clicking sound.
4. Place the holder with the suction head onto the suction plate (or directly onto the wind
screen) and press the lever on the suction head downwards. The suction head will stick
itself firmly to the suction plate.
5. Place the navigation system into the car holder by placing it initially in the lower noses and
then pressing it down gently until the holder clicks in.
Car
Nec
k
Suction
p
late
Suction head
卡扣
Holder