User manual
2. Front View
F. LCD Display
3. Left and Right View
G. USB/DC IN port I. SD/MS /MMC Card Port
Connect to USB cable or power adapter Insert SD/MS/MMC card into this port.
H. Magnetic Stand
Using Your Digital Picture Frame
View pictures from memory cards
Step 1: Install the magnetic stand for tabletop display or prepare a mount on the wall.
Step 2: Power on the unit by either of (1) Connecting it to an electronic socket through the
provided power adapter; (2) Connecting it to a computer through the provided USB cable.
Step 3: Insert a memory card into the card slot at the side of the unit.
Step 4: Press the UP or DOWN button to select “PHOTO” on the main menu, and
press the ENTER button to enter the photo viewer mode.
Step 5: You see thumbnails of all pictures when you enter the photo viewer mode. In the
thumbnail view mode,
• Press the MODE, UP, and DOWN buttons to select a thumbnail. Press the ENTER button
to conrm the selection and enlarge the selected photo to ll the screen.
• Press the ESC button to return to the main menu.
Step 6: In the full-screen mode (Single Show Mode):
• Press the MODE button to start the automated slide show.
• Press the UP and DOWN buttons to display the Previous/Next picture.
• Press and hold the ENTER button to rotate the picture 90°counter-clockwise.
• Press the ENTER button to zoom the picture. When the picture is zoomed in, you can
roam on the picture by pressing the UP, DOWN, MODE, and ESC button. Repeatedly
press the ENTER button until the photo is restored to original size.
• Press the ESC button to return to the thumbnail mode.
• Press and hold the MODE button to enter power saving mode with the screen off. Press
and hold the MODE button again to turn on the screen.
Step 7: In the full screen mode, press the MODE button to enter the auto slide show
mode. During slide show,
• Press the MODE button repeatedly to set the time interval between slides.
• Press the ESC button to stop slide show and return to the thumbnail view mode.