Product Guide

Specifications
7-7/8" (199 mm)
GAS 5-1/8" (131 mm)
COLD 6-3/4" (172 mm)
HOT 5-1/2" (140 mm)
7-1/2" (189 mm)
GAS 5-7/8" (147 mm)
Condensate drain port
COLD 5/8" (17 mm)
HOT 4-3/4" (120 mm)
17-5/8" (448 mm)
6-1/4" (159 mm)
5-3/4" (147 mm)
120 VAC 3" (77 mm)
120 VAC 6-7/8" (174 mm)
∅
Drain port
Female
10-3/4" (272mm)
22-1/22" (570 mm)
Condensate drain port
4" (102 mm)
2-5/8" (68 mm)
Exhaust
Intake
Female
∅
7-7/8" (199 mm)
7-1/2" (189 mm)
7" (180 mm)
4" (101 mm)
17-3/4" (450 mm)
HOT 4-3/4" (120 mm)
6-3/4" (170 mm)
COLD 5/8" (17 mm)
GAS 5-3/4" (147 mm)
Condensate drain port
23-5/8" (600 mm)
2-5/8" (65 mm)
5-3/4" (147 mm)
11-1/4" (285 mm)
1/2 (13 mm)
GAS 5-1/8" (131 mm)
HOT 5-1/2" (140 mm)
COLD 6-3/4" (172 mm)
Condensate drain port
6-1/4" (159mm)
4" (102 mm)
24-7/8" (631 mm)
120 VAC 3" (77 mm)
Drain port 6" (152 mm)
120 VAC 6-7/8" (174 mm)
7-7/8" (199 mm)
GAS 5-1/8" (131 mm)
COLD 6-3/4" (172 mm)
HOT 5-1/2" (140 mm)
7-1/2" (189 mm)
GAS 5-7/8" (147 mm)
Condensate drain port
COLD 5/8" (17 mm)
HOT 4-3/4" (120 mm)
17-5/8" (448 mm)
6-1/4" (159 mm)
5-3/4" (147 mm)
120 VAC 3" (77 mm)
120 VAC 6-7/8" (174 mm)
∅
Drain port
Female
10-3/4" (272mm)
22-1/22" (570 mm)
Condensate drain port
4" (102 mm)
2-5/8" (68 mm)
Exhaust
Intake
Female
∅
7-7/8" (199 mm)
7-1/2" (189 mm)
7" (180 mm)
4" (101 mm)
17-3/4" (450 mm)
HOT 4-3/4" (120 mm)
6-3/4" (170 mm)
COLD 5/8" (17 mm)
GAS 5-3/4" (147 mm)
Condensate drain port
23-5/8" (600 mm)
2-5/8" (65 mm)
5-3/4" (147 mm)
11-1/4" (285 mm)
1/2 (13 mm)
GAS 5-1/8" (131 mm)
HOT 5-1/2" (140 mm)
COLD 6-3/4" (172 mm)
Condensate drain port
6-1/4" (159mm)
4" (102 mm)
24-7/8" (631 mm)
120 VAC 3" (77 mm)
Drain port 6" (152 mm)
120 VAC 6-7/8" (174 mm)
0
1
2
3
4
5
6
7
8
9
10
0 20
H3J: Flow Rate vs. Temperature Rise
40 60 80 100 120
20
0
40
100
120
60
80
0
5
10
15
20
25
30
35
40
45
50
0.0 1.0
H3J: Pressure Loss
2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
Indoor and Outdoor Installation Options
Power Vent or Power Direct Vent Design
Ultra-Low NOx Emissions
Flow Rate up to 6.6 GPM
• Values based on factory testing. 0.4 GPM required for
continuous fire after initial ignition
Water Pressure: 15-150 psi
• Pressure Only Relief Valve Requires (Min 160,000 btu/h,
150 psi).
• 40 psi or above recommended for max. flow
Warranty
• 15-year limited warranty on heat exchanger in residential
applications.
• 5-year limited warranty on heat exchanger in commercial
applications.
• 5-year warranty on all parts.
• Refer to takagi.com for further warranty details
Dimensions
H3J: Flow Rate vs. Temperature Rise
Temperature rise (°F)
Flow rate (gpm)
H3J: Pressure Loss
Flow Rate (gpm)
Pressure Loss (psi) Head (ft)
32