Product Specifications

Model T-K3-OS

06-021-2010

HT W D WT Volt Amp Connections

20.5” 13.8” 8.5” 40 lbs. 120 0.77 3/4” NPT

Max BTU/h Min BTU/h Energy Factor Min Press Max. Press

190,000 11,000 0.82 5.0” W.C. 10.5” W.C.

190,000 11,000 0.82 8.0” W.C. 14.0” W.C.

Input

GPM Water PSI Coil Cap

0.5 - 7.0* 15 - 150 PSI** ≈0.2 Gallons

Clearances Top Bottom Front Back Sides

Outdoor 36“ 12” 24“ 1” 2”

* Category III Required **Current numbers based on factory testing, 0.4 GPM Required for Continuous Fire After initial Ignition.

tube construction with quick release brass or bronze waterways. Heater(s) will be factory assembled and tested.

The heater(s) shall be controlled by onboard solid state printed circuit board monitoring incoming and outgoing temperatures with factory installed

T-K3-OS:

13-3/4"(350mm)

5"(128mm)

8"(203mm)

8"(203mm)1-5/8"(42.5mm)

1/6"(4.5mm)

1-3/8"(35mm)

10"(254mm)

1-3/4"(45mm)1-3/4"(45mm)

1-3/8"(36mm)120V

4-7/8"(124.3mm)GAS

1-7/8"(47mm)

3-1/4"(84mm)COLD

5-1/4"(132.9mm)HOT

20-1/4"(514mm)

21-3/8"(544mm)

1-1/4"(31mm)

1"(26.3mm)

2-3/4"(72mm)COLD

5-3/8"(136.1mm)GAS

3-3/4"(96.5mm)120V

6-1/2"(164.4mm)HOT

9-1/2"(241.3mm)

19-3/8"(492.7mm)