Manual

- 6 -

GENERAL

1. The manifold gas pressure is preset at the factory. It is computer controlled and should

not need adjustment.

2. Maintain proper space for servicing. Install the unit so that it can be connected or

removed easily. Refer to p. 7 and p. 9 for proper clearances.

3. The electrical connection requires a means of disconnection, to terminate power to the

water heater for servicing and safety purposes.

4. If you will be installing the unit in a contaminated area with a high level of dust, sand,

flour, aerosols or other contaminants/chemicals, they can become airborne and enter

and build up within the fan and burner causing damage to the unit. Particles from flour,

aerosols, and other contaminants may reduce the functions of the rotating fan and cause

improper burning of the gas. Regularly ensure that the area around the unit is dust- or

debris-free; regular maintenance is recommended for these types of environment.

5. Particles from flour, aerosols, and other contaminants may clog the air vent or reduce

the functions of the rotating fan and cause improper burning of the gas. Regularly ensure

that the area around the unit is dust- or debris-free; regular maintenance is

recommended for these types of environment.

6. Do not install the unit where the exhaust vent/opening is pointing into any opening in a

building or where the noise may disturb your neighbors. Make sure the vent

termination/exhaust opening meets the required distance by local code from any

doorway or opening to prevent exhaust from entering a building (refer to p. 13).

INCLUDED ACCESSORIES

Check that the installation manual and the warranty card are included with the unit.

Items

Manual

Warranty Card

: 1

Qty: 1