Submittal Sheet

T-H2S-DV
The manufacturer reserves the right to change or disconnue the design, drawing and/or specificaon of its products without noce at any me.
Flow Rate vs. Temperature Rise Pressure Loss
Flow Rate (gpm)
Temperature Rise ( ° F)
Flow Rate (gpm)
Pressure Loss (psi)
Head Feet
Installaon Type
Electric Consumpon
Fuel NG LP
Min 13,000 BTU/h Min 13,000 BTU/h
Max 180,000 BTU/h Max 180,000 BTU/h
Energy Factor 0.91 0.91
Min 5.0" W.C. Min 8.0" W.C.
Max 10.5" W.C. Max 14.0" W.C.
Flow Rate Max 8.0 GPM
40 psi or above recommended for maximum Flow
Water Pressure 15-150 psi
Pressure Only Relief Valve Required
(Min 200,000 BTUs. 150 psi)
Temp Sengs
With PCB Push Buons &
LED Display
100°F, 105°F, 110°F, 115°F, 120°F (Default), 125°F,
135°F, 140°F, 145°F, 150°F, 155°F, 160°F, 165°F,
170°F, 175°F and 185°F (16 opons)
With TM-RE30 Temperature Remote Controller
100°F to 185°F with 5°F intervals (18 opons), 120°F Default Factory Seng
Indoor, Direct Vent Only
120 VAC ; Standby: 0.07 A, Operaon: 1.27 A, Freeze-Protecon: 1.73 A
Gas Consumpon Input
Inlet Gas Pressure
Set Temperature : 125 ° F & lower
Set Temperature: 130
° F & Higher