User Guide

27 Page
CASE 3: Wrong connections between the "CHILD-1" unit and the "CHILD-2" unit
CASE 4: Remote controller connected to incorrect unit
Connecting two “PARENT” connectors together from two separate units may
damage the computer board. The communication cable has a female end and
a male end so it’s impossible to have a PARENT-to-PARENT connection with the
communication cable. Do not splice or modify connectors.
WARNING
Installaon
Installaon Manual
• If you connect the “PARENT” connector of the “CHILD-1” unit to the “1” connector of the
“CHILD-2” unit, the “CHILD-2” unit will operate as an individual unit, and will not be part of the
Easy-Link System.
Prohibited
Wrong connections between
the "CHILD-1" unit and the
"CHILD-2" unit
Communication
cable
Connectors
Right bank of
Dipswitches
OFF
ON
1
2
3
4
5
6
PARENT
1
2
Connectors
Right bank of
Dipswitches
OFF
ON
1
2
3
4
5
6
PARENT
1
2
Connectors
Right bank of
Dipswitches
OFF
ON
1
2
3
4
5
6
PARENT
1
2
PARENT
unit
CHILD-1
unit
CHILD-2
unit
Wrongconnecon
Communication
cable
Connectors
Right bank of
Dipswitches
OFF
ON
1
2
3
4
5
6
PARENT
1
2
Connectors
Right bank of
Dipswitches
OFF
ON
1
2
3
4
5
6
PARENT
1
2
PARENT
unit
CHILD-1
unit
Wrong
connecon
• If a remote controller is used, it has to be connected to the “PARENT” unit. If the remote
controller is connected to a “CHILD” unit, it will only control that particular individual “CHILD”
unit and will not control the Easy-Link System as a whole.
Prohibited
Remote controller
connected to
incorrect unit