Manual

T-D2-IN
S-001-TD2IN-0
The Manufacturer reserves the right to change or disconnue the design, drawing and/or specificaon of its products without noce at anyme.
Flow Rate vs. Temperature Rise
Pressure Loss
Flow Rate (gpm)
Temperature Rise ( ° F)
Pressure Loss (psi)
Head Feet
Installaon Type
Electric Consumpon
Fuel NG LP
Min 11,000 BTU/h Min 11,000 BTU/h
Max 199,000 BTU/h Max 199,000 BTU/h
Energy Factor 0.83 0.82
Min 5.0" W.C. Min 8.0" W.C.
Max 10.5" W.C. Max 14.0" W.C.
Flow Rate Max 10.0 GPM
40 psi or above recommended for maximum Flow
Without Remote (Dipswith Seng)
104°F, 113°F, 122°F (Default), 131°F, 140°F, 158°F,
176°F, 185°F
With TM-RE30 Temperature Remote
Controller : 99°F to 185°F,
122°F Default Factory Seng
99°F, 100°F, 102°F, 104°F, 106°F, 108°F, 109°F, 110°F,
111°F, 113°F, 115°F, 117°F, 122°F (Default), 131°F,
140°F, 158°F, 167°F, 176°F and 185°F
Temperature Sengs
Indoor and Direct Vent Only
120 VAC ; Standby: 0.05 A, Operaon: 0.75 A, Freeze-Protecon: 0.93 A
Gas Consumpon Input
Inlet Gas Pressure
Water Pressure
15-150 psi
Pressure Only Relief Valve Required
(Min 200,000 BTUs. 150 psi)
0
20
40
60
80
100
120
0
10
20
30
40
50
60
70
80
0.0 2.0 4.0 6.0 8.0 10.0 12.0
Set Temperature : 122 ° F & lower
Set Temperature: 131
° F & higher
Flow Rate ( gpm )
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
0 20 40 60 80 100 120 140