Product Specs

10
1) Settings
Before use, it is necessary to adjust settings and perform depth calibration.
Pressing the MODE button from the measurement screen will bring up the settings screen.
(indicated in the diagram below)
Navigate the menu by pressing the GAIN (▲) and L/R (▼) button.
(The current selected setting will appear in red)
To make your selection, Press the MODE button.
Ⅰ) Pitch angle unit selection
Pitch angle can be displayed either in degrees or as a gradient (percentage).
Ⅰ) Select units
for pitch angle
Ⅱ) Select
wireless channel
Ⅲ) Select transmitter
Return to
measurement
screen
a) Navigate to the icon in the top
left corner of the screen and
press the MODE button.
b) Use the GAIN (▲)
and L/R (▼) button to select
degrees or percentage.
c) Press the MODE
button and return to
measurement screen.
4. Operating the Locator
Ⅳ) Depth calibration