Datasheet

311
■
High water protection IP68 (1bar / 30min) polyamide cable gland.
■
Wide selection, for M8 ~ M50, suitable for Φ2.5mm ~ Φ42 mm cable.
■
Super tough and superior heat resistant PA6GF (glass ber lled PA6) material on cap and
connector.
■
Safer halogen free, eco-friedly product.
AG Series
Thicker sealing insert evenly hold a cable by having a larger holding
area.
Remains durable even after repeated tightening / loosening.
Lamellar insert type
If over-tightened, it can cause the rubber bush or cable to deform, which
can allow water to seep in.
Components
■
PA = Polyamide
No.
Part name Material
1 Cap PA6GF
2 Sealing insert TPE
3 Connector PA6GF
4 Lock nut PA6
■
Lock nut is not included for M8 and M10 sizes.
Please drill a proper thread hole into the enclosure for installation.
■
Proper tightening torque varies by each cable diameter.
Tighten the cap until top of the sealing insert forms a small
bead between the cap and the cable.
1 2 3 4
AG SERIES
HIGH WATER PROTECTION CABLE GLAND
Technical Data
Protection class: IP68 1bar / 30min
Operating temperature: -20°C ~ +100°C
Compliant with EN50262 Ver. A
English 2016_277_314.indd 311 16/10/19 11:43