Datasheet

- 346 -
SS12 THRU SS16
1.0 AMP. Surface Mount Schottky Barrier Rectifiers
Voltage Range
20 to 60 Volts
Current
1.0 Ampere
Features
a
For surface mounted application
a
Metal to silicon rectifier, majority carrier conduction
a
Low forward voltage drop
a
Easy pick and place
a
High surge current capability
a
Plastic material used carriers Underwriters
Laboratory Classification 94V-O
a
Epitaxial construction
a
High temperature soldering:
250°C/ 10 seconds at terminals
Mechanical Data
a
Case: Molded plastic
a
Terminals: Solder plated
a
Polarity: Indicated by cathode band
a
Packaging: 12mm tape per EIA STD RS-481
a
Weight: 0.064 gram
SMA/DO-214AC
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number SS12 SS13 SS14 SS15 SS16 Units
Maximum Recurrent Peak Reverse Voltage
20 30 40 50 60 V
Maximum RMS Voltage
14 21 28 35 42 V
Maximum DC Blocking Voltage
20 30 40 50 60 V
Maximum Average Forward Rectified Current
at T
L
(See Fig. 1)
1.0 A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load
(JEDEC method )
40 A
Maximum Instantaneous Forward Voltage
(Note 1)
@ 1.0A
0.5 0.75 V
0.5
Maximum DC Reverse Current @ T
A
=25°C
at Rated DC Blocking Voltage
@ T
A
=100°C
10 5.0
mA
mA
Typical Thermal Resistance ( Note 2 ) R
Û
JL
Typical Thermal Resistance ( Note 2 ) R
Û
JA
28
88
°C/W
°C/W
Operating Temperature Range T
J
-65 to +125 -65 to +150 °C
Storage Temperature Range T
STG
-65 to +150 °C
Notes
:
1. Pulse Test with PW=300 usec, 1% Duty Cycle
Notes
:
2. Measured on P.C.Board with 0.2 x 0.2”(5.0 x 5.0mm) Copper Pad Areas.