Datasheet

ManualsBrandsTaiwan Semiconductor ManualsActive ComponentsTVS diode Tape on Full reel

P4KE SERIES

Taiwan Semiconductor

1 Version: N2104

400W, 6.8V - 440V Transient Voltage Suppressor

FEATURES

● AEC-Q101 qualified available

● Excellent clamping capability

● Low impedance

● 400W surge capability at 10/1000μs waveform

● Fast response time: Typically less than

1.0ps from 0 volt to V

for unidirectional and 5.0ns for

bidirectional

● Typical I

less than 1μA above 10V

● UL recognized file # E-326243

● RoHS Compliant

● Halogen-free according to IEC 61249-2-21

APPLICATIONS

● Protect sensitive circuit from damage by high voltage

transients

● Lighting, ESD transient voltage protection of IC, system

● Inductive switching load protection of IC, system

● Electrical Fast Transient Immunity protection of IC, system

MECHANICAL DATA

● Case: DO-204AL (DO-41)

● Molding compound meets UL 94V-0 flammability rating

● Terminal: Pure tin plated leads, solderable per J-STD-002

● Meet JESD 201 class 2 whisker test

● Polarity: As marked

● Weight: 0.300g (approximately)

KEY PARAMETERS

PARAMETER

VALUE

UNIT

5.5 - 376

(uni - directional)

6.12 - 484

(bi - directional)

6.12 - 484

400

J MAX

175

°C

Package

DO-204AL (DO-41)

ABSOLUTE MAXIMUM RATINGS (T

= 25°C unless otherwise noted)

PARAMETER

SYMBOL

VALUE

UNIT

Peak power dissipation at T

= 25°C, Tp = 1ms

(1)

400

Steady state power dissipation at T

= 75°C

lead lengths .375", 9.5mm

(2)

Peak forward surge current, 8.3 ms single half sine-wave

superimposed on rated load

(3)

FSM

Forward voltage at 25A for Unidirectional only

(4)

3.5/6.5

Operating junction temperature range

-55 to +175

°C

Storage temperature range

STG

-55 to +175

°C

Note:

1. Non-repetitive current pulse per Fig.3 and Derated above T

= 25°C per Fig.2

2. Mounted on 5 x 5 mm copper pads to each terminal

3. 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum

4. V

= 3.5V for devices of V

≦200V and V

= 6.5V max. for device V

>200V

Devices for bipolar applications

1. For bidirectional use C or CA suffix for types P4KE6.8 - types P4KE440

2. Electrical characteristics apply in both directions

Summary of content (8 pages)

PAGE 1
P4KE SERIES Taiwan Semiconductor 400W, 6.8V - 440V Transient Voltage Suppressor FEATURES ● ● ● ● ● ● ● ● ● KEY PARAMETERS AEC-Q101 qualified available Excellent clamping capability Low impedance 400W surge capability at 10/1000μs waveform Fast response time: Typically less than 1.0ps from 0 volt to VBR for unidirectional and 5.0ns for bidirectional Typical IR less than 1μA above 10V UL recognized file # E-326243 RoHS Compliant Halogen-free according to IEC 61249-2-21 PARAMETER VALUE UNIT VWM 5.
PAGE 2
P4KE SERIES Taiwan Semiconductor MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) Part Number Nominal voltage Breakdown voltage VBR@IT (1) (V) Test current IT (mA) Working stand-off voltage VWM (V) Reverse leakage @ VWM ID (uA) VBR IT VWM ID IPPM Vc VBR V mA V μA A V %/°C Min Max Maximum Maximum peak pulse clamping Maximum current voltage temperature IPPM VC@IPPM coefficient (2) (A) (V) P4KE6.8 6.8 6.12 7.48 10 5.50 1000 38.0 10.8 0.057 P4KE6.
PAGE 3
P4KE SERIES Taiwan Semiconductor MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) Part Number Nominal voltage Breakdown voltage VBR@IT (1) (V) Test current IT (mA) Working stand-off voltage VWM (V) Reverse leakage @ VWM ID (uA) VBR IT VWM ID IPPM Vc VBR V mA V μA A V %/°C Min Max Maximum Maximum peak pulse clamping Maximum current voltage temperature IPPM VC@IPPM coefficient (2) (A) (V) P4KE39 39 35.1 42.9 1 31.6 1 7.4 56.4 0.
PAGE 4
P4KE SERIES Taiwan Semiconductor MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) Part Number Nominal voltage Breakdown voltage VBR@IT (1) (V) Test current IT (mA) Working stand-off voltage VWM (V) Reverse leakage @ VWM ID (uA) VBR IT VWM ID IPPM Vc VBR V mA V μA A V %/°C Min Max Maximum Maximum peak pulse clamping Maximum current voltage temperature IPPM VC@IPPM coefficient (2) (A) (V) P4KE180A 180 171 189 1 154 1 1.7 246 0.
PAGE 5
P4KE SERIES Taiwan Semiconductor CHARACTERISTICS CURVES (TA = 25°C unless otherwise noted) Fig.1 Peak Pulse Power Rating Curve Fig.2 Steady State Power Derating Curve 1.25 STEADY STATE POWER DISSIPATION (W) PPPM, PEAK PULSE POWER, KW 100 NON-REPETITIVE PULSE WAVEFORM SHOWN in Fig.3 10 1 0.1 0.1 1 10 100 1000 1 With heat sink 0.75 0.5 Without heat sink 0.25 0 0 10000 25 50 75 100 LEAD TEMPERATURE tp, PULSE WIDTH, (us) Fig.3 Clamping Power Pulse Waveform 125 150 175 (°C) Fig.
PAGE 6
P4KE SERIES Taiwan Semiconductor CHARACTERISTICS CURVES (TA = 25°C unless otherwise noted) Fig.5 Typical Junction Capacitance CJ, JUNCTION CAPACITANCE (pF) 100000 10000 VR=0 1000 MEASURED at STAND-OFF VOLTAGE,Vwm 100 f=1.
PAGE 7
P4KE SERIES Taiwan Semiconductor PACKAGE OUTLINE DIMENSIONS DO-204AL (DO-41) MARKING DIAGRAM Cathode band for uni-directional products only 7 P/N = Marking Code G = Green Compound YWW = Date Code F = Factory Code Version: N2104
PAGE 8
P4KE SERIES Taiwan Semiconductor Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Purchasers are solely responsible for the choice, selection, and use of TSC products and TSC assumes no liability for application assistance or the design of Purchasers’ products. Information contained herein is intended to provide a product description only.