User's Manual
Table Of Contents
- User’s Guide
- Contents
- For your safety
- Menu maps
- 1 About this guide
- 2 Before using your radio
- 3 Getting started
- 4 Basic operation
- 5 Operating in conventional mode
- 6 Operating in trunked mode
- 7 Dialing calls in trunked mode
- 8 GPS location services
- 9 Loneworker monitoring
- 10 Encryption
- 11 Customizing radio settings
- 12 Charging and caring for batteries
- 13 Troubleshooting
- Directive 1999/5/CE Declaration of Conformity
- Tait Software Licence Agreement
Operating in trunked mode 91
DRAFT 4
Checking missed calls
If you have missed an incoming call, it may be stored
in the call queue, so that you can return the call later.
Information about the last missed call is shown on the
display and the queued call icon appears.
In the example below, the last call received was a
status message from Car 1. This call is the first of
three calls stored in the call queue.
Accessing the call queue
1 Use the scroll keys to move through the calls in the
call queue until the call you want appears.
2 Press Options to open the call options menu.
The options available for the call depend on the
type of call it is. If the call is a voice call, select Call
to return the call or Delete to delete the call.
If the call is a status message or a text message,
then select View to read the message.
identity of last
unanswered caller
scroll through
the calls
type of call
position of call
in the call queue
options available
depend on type of
call
queued calls