User's Manual

64 Operating in conventional mode
DRAFT 2
Selecting a voting group
Using the channel selector
You can use the channel selector to select a preset
voting group, if your radio is programmed in this way.
■ Rotate the channel selector to the group
you want.
Using a function key
To use a function key to select a voting group:
■ Press the function key to select and activate a
preset voting or scan group.
Using the Main menu
To select a voting group using the Main menu:
1 Press
Menu and select Channels.
2 Scroll to the group you want and press
Select.
Suspending a channel from a voting
group
You may be able to use the function key programmed
for ‘nuisance delete’ to temporarily remove one of the
channels from the voting group.
To remove a channel from a voting group:
1 Wait until the radio has stopped on the channel
that you want to remove from the voting group.
2 Press the function key programmed for nuisance
delete.
If the channel has been removed successfully, the
message
Channel nuisance deleted briefly
appears in the display.
Channels
Vote 1
Channel 9
SelectBack