User's Manual
Table Of Contents
- Contents
- For your safety
- Menu maps
- 1 About this guide
- 2 Before using your radio
- 3 Getting started
- 4 Basic operation
- 5 Operating in conventional mode
- 6 Operating in P25 trunking mode
- 7 Scanning
- 8 P25 services
- 9 GPS location services
- 10 Emergency operation
- 11 Encryption
- 12 Customizing radio settings
- 13 Charging and caring for batteries
- 14 Troubleshooting
- 15 Glossary
- Index
- Directive 1999/5/CE Declaration of Conformity
- Tait Software Licence Agreement
GPS location services 105
DRAFT 2
Receiving and logging GPS
information
This feature is controlled by a software license
(SFE) and may not be available with your radio.
When your radio receives GPS location information,
the display shows
Location, along with the digital
‘alias’ of the sending radio. If the radio alias is not
available, the radio ID appears.
The location information can then be viewed and
logged. The most recent location details of up to 10
radios will be available, until the radio is turned off.
You only receive a
Location message from a radio
that you have not previously logged. Updated
information from a previously logged radio is
automatically stored by your radio, without first being
viewed.
To display and log the received GPS location of a
radio:
1 Press
View.
The location information appears in the display.
2 Press Store to log the location information for that
radio.
The message
Logging... briefly appears in the
display.
Location
Car 1
radio sending the
location information
ViewCancel
Location
Car 1
radio sending the
location information
ViewCancel
StoreCancel
Zone: 55 valid
Easting: 321025
Northing: 5812578