User's Manual
Table Of Contents
- Contents
- For your safety
- Menu maps
- 1 About this guide
- 2 Before using your radio
- 3 Getting started
- 4 Basic operation
- 5 Operating in conventional mode
- 6 Operating in P25 trunking mode
- 7 Scanning
- 8 P25 services
- 9 GPS location services
- 10 Emergency operation
- 11 Encryption
- 12 Customizing radio settings
- 13 Charging and caring for batteries
- 14 Troubleshooting
- 15 Glossary
- Index
- Directive 1999/5/CE Declaration of Conformity
- Tait Software Licence Agreement
104 GPS location services
DRAFT 2
2 Scroll to Off (or On) and press Select. (The current
setting is highlighted.)
Using a function key
You may be able to use a function key to manually
send your GPS location to either all radios on the
channel, or to your dispatcher (depending on how
your radio is programmed).
1 Press the function key programmed for GPS.
(Alternatively, press
Menu and select Location Svs
> GPS Info.)
The current GPS location of the radio appears in
the display.
2 Press
Send.
The message
Location sent briefly appears in the
display.
Send on PTT
Off
On
SelectBack
SendExit
Zone: 55 Trk
Easting: 321025
Northing: 5812578
Location
sent