User's Manual
Table Of Contents
- TP9400 User’s Guide DRAFT
- Contents
- For your safety
- Menu maps
- 1 About this guide
- 2 Before using your radio
- 3 Getting started
- 4 Basic operation
- 5 Operating in conventional mode
- 6 Operating in P25 trunking mode
- 7 Editing a scan group
- 8 P25 services
- 9 Emergency operation
- 10 Encryption
- 11 Customizing radio settings
- 12 Charging and caring for batteries
- 13 Troubleshooting
- 14 Glossary
- Index
- Directive 1999/5/CE Declaration of Conformity
- Tait Software Licence Agreement
72 Operating in P25 trunking mode
Making an individual call
Caution In some situations, your call will not proceed.
For an explanation of the radio behavior, see
“Unconnected calls” on page 75.
To make a call to one radio on a trunking system:
1 Press Menu and select Individual call. (The person
to whom you last made an individual call is
highlighted.)
Depending on your radio model and how it is
programmed, you may be able to dial the identity
of the radio you want to call, press a function key or
use your Quick Access menu to select an
individual call.
2 Scroll to the person you want to call and press Select
or press the PTT key.
The message Calling... briefly appears.
3 Press and hold the PTT key to transmit.
4 When you hear three short beeps, speak clearly into
the microphone and release the PTT key when you
have finished talking.
Individual call
Car 2
Car 1
SelectCancel
Calling...
Car 2
MenuCancel