User's Manual
Table Of Contents
- TP9400 User’s Guide DRAFT
- Contents
- For your safety
- Menu maps
- 1 About this guide
- 2 Before using your radio
- 3 Getting started
- 4 Basic operation
- 5 Operating in conventional mode
- 6 Operating in P25 trunking mode
- 7 Editing a scan group
- 8 P25 services
- 9 Emergency operation
- 10 Encryption
- 11 Customizing radio settings
- 12 Charging and caring for batteries
- 13 Troubleshooting
- 14 Glossary
- Index
- Directive 1999/5/CE Declaration of Conformity
- Tait Software Licence Agreement
Operating in conventional mode 57
Using the radio in different
repeater areas
Your radio may have a group of channels programmed as
a voting group. The channels in the voting group all
carry the same traffic, but from different repeaters.
As your radio moves in and out of different repeater
coverage areas, the best communication channel is
automatically selected for you to use.
This channel is known as the ‘home’ channel, and may be
the channel you make and receive calls on.
While voting is active, appears in the display.
Selecting a voting group
Using the channel selector
You can use the channel selector to select a preset
voting group, if your radio is programmed in this way.
■ Rotate the channel selector to the group you want.
Using a function key
To use a function key to select a voting group:
■ Press the function key to select and activate a
preset voting or scan group.
Using the Main menu
To select a voting group using the Main menu:
1 Press Menu and select Channels.
Vote 1
Menu