User's Manual
Table Of Contents
- TP9300 User’s Guide
- Contents
- For your safety
- Menu maps
- 1 About this guide
- 2 Before using your radio
- 3 Getting started
- 4 Basic operation
- 5 Operating in trunked mode
- Checking that your network is available
- Making a preset call
- About trunked zones and workgroups
- About emergency operation
- Dialing a PABX number
- Dialing a PSTN number
- Receiving a call
- Re-establishing a call
- Checking missed calls
- About status messages
- About trunked text messages
- Placing the radio in do-not-disturb mode
- Calls to conventional channels or conventional groups
- 6 Dialing calls in trunked mode
- 7 Operating in conventional mode
- Selecting a zone
- Selecting a channel
- Selecting a group
- Checking that a channel is clear
- Making a call
- Making a call using the address book
- Making a local call
- Connecting to a telephone network
- Making an emergency call
- Sending a status message
- Transmitting at low power
- Ending active calls
- Activating the repeater before a call
- Communicating directly with other radios
- Receiving a call
- Receiving a text message
- Hearing faint and noisy signals
- Using the radio in different repeater areas
- Scanning a group of channels
- 8 Customizing radio settings
- 9 Charging and caring for batteries
- 10 Troubleshooting
- Directive 1999/5/CE Declaration of Conformity
- Tait Software Licence Agreement
Operating in trunked mode 67
Placing the radio in do-not-disturb
mode
If you do not want calls for a while, you can place the
radio in do-not-disturb mode, so that incoming calls can
be ignored. You can make outgoing calls in the usual
way.
While do-not-disturb mode is active, incoming
calls cannot be stored in the call queue.
Using a function key
1 Press the function key programmed for do not
disturb, to activate the do-not-disturb function.
The message Do not disturb activated appears in
the display. Your radio will now ignore all incoming
calls.
2 To deactivate the do-not-disturb function, press the
do-not-disturb function key again.
The message Do not disturb deactivated appears in
the display.
Using the Main menu
1 Select Menu > Radio Settings >
Call Settings > Do not disturb.
2 In the Do Not Disturb menu, choose On.
3 Press Select.
The message Do not disturb activated appears in
the display. Your radio will now ignore all incoming
calls.