User's Manual
Table Of Contents
- Directive 1999/5/EC Declaration of Conformity
- Safety and compliance warnings
- Radio frequency exposure information
- Radio frequency emissions limits in the USA
- Health, safety and electromagnetic compatibility inEurope
- Electromagnetic compatibility in European vehicles
- EN60950 requirements (25 watt radios)
- Safe radio operation
- High radio surface temperatures
- Radio protection when charging the vehicle battery
- GPS operation
- Your radio’s settings
- Contents
- About this guide
- Getting started
- Basic operation
- Operating in conventional mode
- Operating in MPT trunked mode
- Changing your operating mode
- Checking that your network is available
- Changing your network
- Making a preset call
- About emergency operation
- Dialling a pabx number
- Dialling a pstn number
- Receiving a call
- Re-establishing a call
- Checking missed calls
- About status messages
- About text messages
- Calls to conventional channels or groups
- Dialling calls in MPT trunked mode
- Troubleshooting
- Tait general software licence agreement
58 Operating in MPT trunked mode
Sending a text message
1 When you have chosen or entered a message, press
Options and the Send To menu opens.
2 In the Send To menu, scroll
through the list of options until
the choice you want appears.
If your radio has a keypad
microphone installed, you can
choose the option
Send to dialled, then dial
the number of the party you
wish to call.
3 Press Send.
The call details appear in the
display. While the call is being
setup, you can cancel the call by
pressing Clear.
Calls to conventional channels or groups
You may be able to dial conventional channels or groups,
using 101 to 110. The channels or groups called using these
numbers are programmed for your radio.
To call a conventional channel or group:
1 Dial the number for the channel or group you wish to call.
2 Press Send or the or PTT key.
Your radio switches to the conventional channel
programmed for that number.