User's Manual
Table Of Contents
- Directive 1999/5/EC Declaration of Conformity
- Safety and compliance warnings
- Radio frequency exposure information
- Radio frequency emissions limits in the USA
- Health, safety and electromagnetic compatibility inEurope
- Electromagnetic compatibility in European vehicles
- EN60950 requirements (25 watt radios)
- Safe radio operation
- High radio surface temperatures
- Radio protection when charging the vehicle battery
- GPS operation
- Your radio’s settings
- Contents
- About this guide
- Getting started
- Basic operation
- Operating in conventional mode
- Operating in MPT trunked mode
- Changing your operating mode
- Checking that your network is available
- Changing your network
- Making a preset call
- About emergency operation
- Dialling a pabx number
- Dialling a pstn number
- Receiving a call
- Re-establishing a call
- Checking missed calls
- About status messages
- About text messages
- Calls to conventional channels or groups
- Dialling calls in MPT trunked mode
- Troubleshooting
- Tait general software licence agreement
36 Operating in conventional mode
Activating repeater talkaround by using a
function key
1 Change to the required channel.
2 Press the programmed function key to turn repeater talk-
around on.
The message Talkaround acti-
vated appears and the repeater
talkaround symbol appears
in the display.
3 Proceed with your call.
4 To turn repeater talkaround off, either:
■ change the channel, or
■ press the function key again.
Activating repeater talkaround by using the
Main menu
1 Change to the required channel.
2 Select Menu>Radio settings>
Function settings>Repeater talkaround.
3 In the Repeater talkaround
menu, choose On.
4 Press Select.
The message Talkaround acti-
vated appears. The repeater talka-
round symbol appears if you
navigate to the default display.
5 Proceed with your call.
6 To turn repeater talkaround off, either:
■ change the channel, or
■ choose Off in the Repeater talkaround menu and
press Select.