User's Manual
Table Of Contents
- Directive 1999/5/EC Declaration of Conformity
- Safety and compliance warnings
- Radio frequency exposure information
- Radio frequency emissions limits in the USA
- Health, safety and electromagnetic compatibility inEurope
- Electromagnetic compatibility in European vehicles
- EN60950 requirements (25 watt radios)
- Safe radio operation
- High radio surface temperatures
- Radio protection when charging the vehicle battery
- GPS operation
- Your radio’s settings
- Contents
- About this guide
- Getting started
- Basic operation
- Operating in conventional mode
- Operating in MPT trunked mode
- Changing your operating mode
- Checking that your network is available
- Changing your network
- Making a preset call
- About emergency operation
- Dialling a pabx number
- Dialling a pstn number
- Receiving a call
- Re-establishing a call
- Checking missed calls
- About status messages
- About text messages
- Calls to conventional channels or groups
- Dialling calls in MPT trunked mode
- Troubleshooting
- Tait general software licence agreement
Operating in conventional mode 35
Activating monitor by using the Main menu
1 Select Menu>Radio settings>
Function settings>Monitor.
2 In the Monitor menu,
choose On.
3 Press Select.
While monitor is on, the green
LED flashes slowly and the moni-
tor symbol appears in
the display.
Note: Your radio may be programmed so that monitor turns
off automatically after a short time.
Communicating directly with other radios
You can bypass the radio repeater and communicate directly
with another radio. This feature is known as repeater talka-
round.
You can do this, for example, when you are out of range of
the repeater, or if the repeater is busy or stops working for
whatever reason.
While repeater talkaround is active, all transmissions are
made on the receive frequency of the channel you are on.
To activate repeater talkaround, you may be able to either:
■ use a programmed function key, or
■ use the Main menu.