User's Manual
Table Of Contents
- Directive 1999/5/EC Declaration of Conformity
- Safety and compliance warnings
- Radio frequency exposure information
- Radio frequency emissions limits in the USA
- Health, safety and electromagnetic compatibility inEurope
- Electromagnetic compatibility in European vehicles
- EN60950 requirements (25 watt radios)
- Safe radio operation
- High radio surface temperatures
- Radio protection when charging the vehicle battery
- GPS operation
- Your radio’s settings
- Contents
- About this guide
- Getting started
- Basic operation
- Operating in conventional mode
- Operating in MPT trunked mode
- Changing your operating mode
- Checking that your network is available
- Changing your network
- Making a preset call
- About emergency operation
- Dialling a pabx number
- Dialling a pstn number
- Receiving a call
- Re-establishing a call
- Checking missed calls
- About status messages
- About text messages
- Calls to conventional channels or groups
- Dialling calls in MPT trunked mode
- Troubleshooting
- Tait general software licence agreement
Operating in conventional mode 33
2 In the Channels menu, scroll
through the list of channels and
groups until the group you want
appears.
3 Press Done.
The amber LED glows and the
scanning symbol appears in
the display.
Selecting a group by using your Quick
Access menu
Note: Your scroll keys may be programmed for channel
scroll. If this is the case, press the scroll key to imme-
diately begin scrolling through your list of channels
and groups.
1 Press one of the scroll keys or to open the
Channels menu.
Alternatively, the left selection
key may be programmed as your
Quick Access menu. In this case,
press the left selection key
to access the Channels menu.
2 Scroll through the list of chan-
nels and groups until the group
you want appears.
3 Press Done.
The amber LED glows and the
scanning symbol appears in
the display.