User's Manual
Table Of Contents
- Directive 1999/5/EC Declaration of Conformity
- About this guide
- For your safety
- Safety warnings used in this guide
- Radio frequency exposure information
- Controlling your exposure to RF energy
- Compliance with RF energy exposure standards
- Radio frequency emissions limits in the USA
- Unapproved modifications or changes to radio
- Health, safety and electromagnetic compatibility in Europe
- Electromagnetic compatibility in European vehicles
- EN 60950 requirements (25 watt radios)
- Interference with electronic devices
- AS/NZS 4365 requirements
- Frequency band reserved for distress beacons
- Safe radio operation
- High radio surface temperatures
- Radio protection when charging the vehicle battery
- GPS operation
- Your radio’s settings
- Contents
- Getting started
- Basic operation
- Operating in conventional mode
- Operating in MPT trunked mode
- Changing your operating mode
- Checking that your network is available
- Changing your network
- Making a preset call
- About talkgroups and scan groups
- Making a talkgroup call
- Changing group membership
- Making an emergency call
- Dialling a PABX number
- Dialling a PSTN number
- Receiving a call
- Re-establishing a call
- Checking missed calls
- About status messages
- About text messages
- Calls to conventional channels or groups
- Dialling calls in MPT trunked mode
- Troubleshooting
- Tait general software licence agreement
92 Troubleshooting
two low-
pitched beeps
Radio's temperature is high: the radio's temperature is
in the high-temperature range, but the radio will
continue to operate
two high-pitched beeps Radio's temperature is very high: the radio's
temperature is in the very high temperature range
and all transmissions will now be at low power; if
the radio's temperature rises outside this range,
transmissions will be inhibited
continuous low-
pitched tone
Radio system error: a system error has occurred
and the radio may be inoperable
two long low-high
pitched tone pairs
Synthesizer is out-of-lock: the radio's synthesizer
is out-of-lock on the current channel and you
cannot operate on that channel
Action and tone Meaning