User's Manual
Table Of Contents
- Directive 1999/5/EC Declaration of Conformity
- About this guide
- For your safety
- Safety warnings used in this guide
- Radio frequency exposure information
- Controlling your exposure to RF energy
- Compliance with RF energy exposure standards
- Radio frequency emissions limits in the USA
- Unapproved modifications or changes to radio
- Health, safety and electromagnetic compatibility in Europe
- Electromagnetic compatibility in European vehicles
- EN 60950 requirements (25 watt radios)
- Interference with electronic devices
- AS/NZS 4365 requirements
- Frequency band reserved for distress beacons
- Safe radio operation
- High radio surface temperatures
- Radio protection when charging the vehicle battery
- GPS operation
- Your radio’s settings
- Contents
- Getting started
- Basic operation
- Operating in conventional mode
- Operating in MPT trunked mode
- Changing your operating mode
- Checking that your network is available
- Changing your network
- Making a preset call
- About talkgroups and scan groups
- Making a talkgroup call
- Changing group membership
- Making an emergency call
- Dialling a PABX number
- Dialling a PSTN number
- Receiving a call
- Re-establishing a call
- Checking missed calls
- About status messages
- About text messages
- Calls to conventional channels or groups
- Dialling calls in MPT trunked mode
- Troubleshooting
- Tait general software licence agreement
78 Operating in MPT trunked mode
3 Press Send.
The call details appear in the
display. While the call is being
setup, you can cancel the call by
pressing Clear.
Dialling a status message
Note: This feature is only available for radios with
alphanumeric keys.
The status messages programmed for your radio can be
dialled if you know the number associated with the
status message.
To dial a status message:
1 Dial *0s*n, where s is the
number of the status message
and n is the radio unit number
you wish to send the
message to.
2 Alternatively, dial *0s*p, where p is the number of a
preset call. See “Dialling a preset call” on page 62 for
more information.
3 Press Send or the or PTT key.
The call details appear in the
display. While the call is being
setup, you can cancel the call by
pressing Clear.
Calling...
*02*Car 2
Clear
234
*030*590
Clear Send
234
Calling...
*030*590
Clear
234