User's Manual
Table Of Contents
- Directive 1999/5/EC Declaration of Conformity
- About this guide
- For your safety
- Safety warnings used in this guide
- Radio frequency exposure information
- Controlling your exposure to RF energy
- Compliance with RF energy exposure standards
- Radio frequency emissions limits in the USA
- Unapproved modifications or changes to radio
- Health, safety and electromagnetic compatibility in Europe
- Electromagnetic compatibility in European vehicles
- EN 60950 requirements (25 watt radios)
- Interference with electronic devices
- AS/NZS 4365 requirements
- Frequency band reserved for distress beacons
- Safe radio operation
- High radio surface temperatures
- Radio protection when charging the vehicle battery
- GPS operation
- Your radio’s settings
- Contents
- Getting started
- Basic operation
- Operating in conventional mode
- Operating in MPT trunked mode
- Changing your operating mode
- Checking that your network is available
- Changing your network
- Making a preset call
- About talkgroups and scan groups
- Making a talkgroup call
- Changing group membership
- Making an emergency call
- Dialling a PABX number
- Dialling a PSTN number
- Receiving a call
- Re-establishing a call
- Checking missed calls
- About status messages
- About text messages
- Calls to conventional channels or groups
- Dialling calls in MPT trunked mode
- Troubleshooting
- Tait general software licence agreement
Operating in MPT trunked mode 67
Changing group membership using the
Main menu
Your radio may be programmed with permanent or user-
selectable talkgroups and scan groups. If any talkgroup or
scan group is user-selectable, you can choose to unsubscribe
from that group or subscribe to it.
To change your group membership:
1 Select Menu>Group
select>Edit groups.
2 In the Groups menu, scroll
through the list of groups. In
the Groups list, the group
membership status of a group is
show in the following way:
■ a + symbol shows that you
are currently a member of the group. Note that if you
are a member of a scan group, all the members of the
scan group also have a + beside them.
■ a P symbol shows that this is a permanent group
whose membership cannot be changed.
■ If there is no symbol beside the group, then the radio
is currently unsubscribed from this group.
3 Press Change and the + beside the group is either
added or removed.
4 When you have made the required changes in the Groups
list, press Back to exit the Groups menu.
The new group ID may appear in
the display, or if more than one
group has been selected, the
display show Multi.
Group select
Edit groups
Subscribe all
Back Select
Groups
992 +
Scan1 P
Back Change
Talkgroup
Multi
Menu
234