User's Manual
Table Of Contents
- Directive 1999/5/EC Declaration of Conformity
- About this guide
- For your safety
- Safety warnings used in this guide
- Radio frequency exposure information
- Controlling your exposure to RF energy
- Compliance with RF energy exposure standards
- Radio frequency emissions limits in the USA
- Unapproved modifications or changes to radio
- Health, safety and electromagnetic compatibility in Europe
- Electromagnetic compatibility in European vehicles
- EN 60950 requirements (25 watt radios)
- Interference with electronic devices
- AS/NZS 4365 requirements
- Frequency band reserved for distress beacons
- Safe radio operation
- High radio surface temperatures
- Radio protection when charging the vehicle battery
- GPS operation
- Your radio’s settings
- Contents
- Getting started
- Basic operation
- Operating in conventional mode
- Operating in MPT trunked mode
- Changing your operating mode
- Checking that your network is available
- Changing your network
- Making a preset call
- About talkgroups and scan groups
- Making a talkgroup call
- Changing group membership
- Making an emergency call
- Dialling a PABX number
- Dialling a PSTN number
- Receiving a call
- Re-establishing a call
- Checking missed calls
- About status messages
- About text messages
- Calls to conventional channels or groups
- Dialling calls in MPT trunked mode
- Troubleshooting
- Tait general software licence agreement
42 Operating in conventional mode
3 Press Select.
The zone indication may be
programmed to appear either
below the channel information
or beside the RSSI symbol.
Selecting a zone by using your Quick
Access menu
Note: Your scroll keys may be programmed for zone scroll. If
this is the case, press the scroll key to immediately
begin scrolling through your list of zones.
1 Press one of the scroll keys or to open the
Zones menu.
Alternatively, the left selection
key may be programmed as your
Quick Access menu. In this case,
press the left selection key
to access the Zones menu.
2 Scroll through the list of zones
until the zone you want appears.
3 Press Select.
The zone indication may be
programmed to appear either
below the channel information
or beside the RSSI symbol.
Channel 9
Zone 3
Menu
Channel 1
Zone 2
Zones Menu
Zones
Zone 2 2
Zone 3
Back Select
Channel 9
Zone 3
Menu