User's Manual
Table Of Contents
- Directive 1999/5/EC Declaration of Conformity
- About this guide
- For your safety
- Safety warnings used in this guide
- Radio frequency exposure information
- Controlling your exposure to RF energy
- Compliance with RF energy exposure standards
- Radio frequency emissions limits in the USA
- Unapproved modifications or changes to radio
- Health, safety and electromagnetic compatibility in Europe
- Electromagnetic compatibility in European vehicles
- EN 60950 requirements (25 watt radios)
- Interference with electronic devices
- AS/NZS 4365 requirements
- Frequency band reserved for distress beacons
- Safe radio operation
- High radio surface temperatures
- Radio protection when charging the vehicle battery
- GPS operation
- Your radio’s settings
- Contents
- Getting started
- Basic operation
- Operating in conventional mode
- Operating in MPT trunked mode
- Changing your operating mode
- Checking that your network is available
- Changing your network
- Making a preset call
- About talkgroups and scan groups
- Making a talkgroup call
- Changing group membership
- Making an emergency call
- Dialling a PABX number
- Dialling a PSTN number
- Receiving a call
- Re-establishing a call
- Checking missed calls
- About status messages
- About text messages
- Calls to conventional channels or groups
- Dialling calls in MPT trunked mode
- Troubleshooting
- Tait general software licence agreement
34 Basic operation
1
Select Menu>Radio settings>
Display settings>Backlight level.
2 In the Backlight Level menu,
choose either High, Medium
or Low.
3 Press Select.
Changing the contrast of the radio display
If the radio’s display is too dark or too light, you may be able
to adjust the contrast by using the Contrast Adjust menu.
1 Select Menu>Radio settings>
Display settings>Contrast
adjust.
2 In the Contrast Adjust menu, use
the scroll keys or to
adjust the display contrast to the
desired level.
3 Press Save to save this setting.
Display settings
Backlight level
Backlighting 2
Back Select
Backlight level
Medium
High 2
Back Select
Display settings
Backlighting2
Contrast adjust
Back Select
Use scroll keys to
adjust
Cancel Save