User's Manual

6 Basic operation
About your radio
Turning your radio on/off
A long press of the on/off key turns the radio either on
or off. When the radio is first turned on, the red, green
and amber LEDs flash briefly and the radio gives two
short beeps.
.
Adjusting the volume
Rotate the volume control clockwise to increase the
speaker volume, and counter-clockwise to decrease the
volume. The raised dot indicates the current volume
setting.
Making calls
1 Select the required channel, scan group, zone or
preset call.
2 Lift the microphone off the microphone clip.
3 Hold the microphone about 5 cm (2 inches) from
your mouth and press the PTT key to transmit.
Note: If the channel is busy, you will not be able to
transmit. Wait until the red status LED has stopped
flashing, and then try again.
4 Speak clearly into the microphone and release the
PTT key when you have finished talking.
volume
control
on/off key