User's Manual
Table Of Contents
- Directive 1999/5/EC Declaration of Conformity
- About this guide
- Your radio’s settings
- Part 1: Radio operation
- Safety and compliance warnings
- Radio frequency exposure information
- Radio frequency emissions limits in the USA
- Health, safety and electromagnetic compatibility inEurope
- Electromagnetic compatibility in European vehicles
- EN60950 requirements (25 watt radios)
- Safe radio operation
- High radio surface temperatures
- Radio protection when changing the vehicle battery
- Getting started
- Basic operation
- Operating in conventional mode
- Troubleshooting
- Notes
- Safety and compliance warnings
- Part 2: Radio installation procedures
26 Operating in conventional mode
Selecting a channel or scan group by using
the Main menu
1 Select Menu>Channels.
2 In the Channels menu, scroll
through the list of channels and
scan groups until the channel or
scan group you want appears.
3 Press Done.
If you have selected a scan
group, the amber LED glows and
the scanning icon appears in
the icon bar.
Selecting a channel or scan group by using
your Quick Access menu
1 Press one of the scroll keys
or to open the
Channels menu.
2 Scroll through the list of chan-
nels and scan groups until the
channel or scan group you
want appears.
3 Press Done.
If you have selected a scan
group, the amber LED glows and
the scanning icon appears in
the icon bar.