User's Manual

Table Of Contents
10 Description TB9400 Installation and Operation Manual
© Tait Limited December 2013 (Draft)
1.1 Features
The following are some of the features of the base station:
Fully compliant with the Project 25 Common Air Interface. Can
therefore interoperate with any similarly compliant radios.
Linear power amplifier allows operation with Linear Simulcast
Modulation (LSM). Future software upgrades will also allow
P25 Phase 2 operation (H-DQPSK modulation).
Integrated built-in voting facility. No external voter is needed.
Can be completely managed remotely from a PC running a web
browser: configuration, alarm monitoring, fault diagnosis, feature and
firmware upgrades. Alarms can also be reported via SNMP traps,
allowing integration with an SNMP-based network management
system.
An integrated wiring solution is provided for the system control bus and
DC power connections to each module in the subrack.
Reciters (receiver/exciter modules) can be replaced without affecting
the operation of other reciters in the same subrack.
Rugged construction with generous heatsinks and fan-forced cooling
for continuous operation from –30°C to +60°C (–22°F to +140°F).