User's Manual

DRAFT 4
TB9400 Installation and Operation Manual Installation 69
© Tait Electronics Limited September 2011
5.3 Identifying the Equipment
You can identify the model and hardware configuration of the TB9400
modules by referring to the product code printed on labels at the rear of
each module. The meaning of each character in the product code is
explained in the tables below.
Note This explanation of product codes is not intended to suggest that
any combination of features is necessarily available in any one
product. Consult your regional Tait office for more information
regarding the availability of specific models and options.
Reciter Product
Codes
PA Product Codes
Product Code Description
T01-01103-X
XXX Frequency Band and Sub-band
N = 762MHz to 870MHz
a
(K4)
a. The actual frequency coverage in this band is:
Transmit: 762MHz to 776MHz and 850MHz to 870MHz
Receive: 792MHz to 824MHz
T01-01103-XXXX A = standard
T01-01103-XXX
X A = default
T01-01103-XXXX
A = default
Product Code Description
T01-01121-X
XXX Frequency Band and Sub-band
N = 762MHz to 870MHz
a
(K4)
a. The actual frequency coverage in this band when used with a K-band TB9400 reciter
is 762MHz to 776MHz and 850MHZ to 870MHz.
T01-01121-XXXX A = 50 W
B = 100 W
T01-01121-XXX
X A = default
T01-01121-XXXX
A = default