User's Manual
Table Of Contents
- Installation and Operation Manual Draft in Progress
- Contents
- Preface
- 1 Description
- 2 General Safety and Regulatory Information
- 3 Operation
- 4 Working with Base Stations from Your PC
- 4.1 PC Recommendations
- 4.2 Connecting Your PC to the Base Station
- 4.3 Working with the Web Interface
- 4.4 Basic Tasks
- 4.4.1 User Settings
- 4.4.2 Taking the Base Station Offline
- 4.4.3 Troubleshooting Alarms
- 4.4.4 Working with Configuration Files
- 4.4.5 Configuring Single Base Stations
- 4.4.6 Configuring Base Stations in a Channel Group
- 4.4.7 Setting Up Custom Alarms
- 4.4.8 Disabling the Front Panel Keypad
- 4.4.9 Preparing to Download Firmware
- 5 Installation
- 6 Maintenance
- 7 Troubleshooting
- 8 Replacing Modules
- Appendix A – Interface Pin Allocations
- Appendix B – Inter-Module Connections
- TaitNet P25 Glossary
- Tait Software License Agreement
DRAFT 4
TB9400 Installation and Operation Manual Working with Base Stations from Your PC 47
© Tait Electronics Limited September 2011
4.2.1 Logging In
1. Enter the base station’s URL into your browser: the default address is
https://192.168.1.2
(note the use of a secure-socket connection). To
find out the base station’s IP address, on the front panel select Mod-
ules > Reciter 1 (or 2) > View Reciter 1 (or 2) Address. To set the
IP address, refer to “Setting the IP Address” on page 48.
Note If access to this menu on the front panel has been disabled, you can
find out the IP address by .....how??
2. A security warning appears when you connect for the first time.
Proceed anyway (refer to “Responding to Security Warnings” on
page 49).
3. The login screen appears.
4. Enter your user name and password. When connecting for the first
time, enter the user name “admin” and password “tbc_admin”.
5. Click Login.
Verify default address.
?
?
?
?