User's Manual

18 Description TB9300 Installation and Operation Manual
© Tait Limited March 2017
1.4 Frequency Bands and Sub-bands
Much of the circuitry in the base station is common to all frequency bands,
and is therefore covered by a single description in this manual. In some
cases the descriptions refer to specific bands or sub-bands, and these are
identified with the letters listed in the following table.
In Brazil, for K and L bands, the TB9300 is considered to be configured as
a base station with retransmission of receive frequencies.
Frequency
Identification Frequency Band and Sub-band 50W 100W
B band B2 = 136 to 156 MHz
B3 = 148 to 174 MHz
✓ ✓
C Band C3 = 216 to 225 MHz
✓
G band G4 = 330 to 380 MHz
✓
H band H1 = 400 to 440 MHz
H2 = 440 to 480 MHz
H3 = 470 to 520 MHz
✓ ✓
HC = 400 to 440 MHz (receive)
HC = 440 to 480 MHz (transmit)
✓
K band K4
Transmit: 762 to 776 & 850 to 870
MHz
Receive: 792 to 824 MHz
K8
Transmit: 757 to 758 MHz
Receive: 787 to 788 MHz
✓ ✓
✓
L band L2 = 896 to 902 MHz (receive)
L2 = 927 to 941 MHz (transmit)
✓