User's Manual
Table Of Contents
- Specifications Manual
- Tait Contact Information
- Contents
- Preface
- 1 System Specifications
- Supply
- Power Consumption @ 13.8 VDC
- Power Consumption Band B1, 25 W*
- Power Consumption Band B1, 50 W*
- Power Consumption Band H5, 25 W*
- Power Consumption Band H5, 40 W*
- Power Consumption Band H6, 25 W*
- Power Consumption Band H7, 40 W*
- Transmitting into 5:1 VSWR*
- Channel Data
- Environmental
- Physical
- Isolation
- RF Compliance
- EMC Compliance
- Environmental Compliance
- Safety Compliance
- General
- 2 Receiver Specifications
- 3 Transmitter Specifications
TB7100 Specifications Manual System Specifications 7
© Tait Electronics Limited May 2005
1 System Specifications
This chapter provides specifications pertaining to the TB7100 base station.
You will find the specifications for receiver and transmitter modules in
separate chapters in this manual.
The performance figures given in these specifications are applicable to the
TB7100 base station. These performance figures are minimum figures,
unless otherwise indicated (typical), for equipment operating at standard
room temperature (+22°C to +28°C [+71.6°F to +82.4°F]) and standard
test voltage (12 VDC).
Where applicable, the test methods used to obtain these figures are those
described in the ANSI/TIA-603-B-2002 and ETSI-EN specifications. This
equipment is compatible with F3E and G3E emissions. You can obtain
further details of test methods and the conditions which apply for
compliance testing in all countries from Tait Electronics Limited.
Identifying the
TB7100 Base Station
You can identify the model and hardware configuration of a base station by
referring to the product code printed on labels on the rear of the tray. The
meaning of each character in the product code is explained in the table
below.
Note This explanation of the TB7100 base station product codes is not
intended to suggest that any combination of features is necessarily
available in any one TB7100 base station. Consult your nearest
Tait Dealer or Customer Service Organisation for more informa-
tion regarding the availability of specific models and options.
Example:
TBBB1A = TB7100, 136MHz-174MHz, 25W, Level 1 digital architecture.
Product Code Description
TBBcd
e cd = frequency band
A4 = 66-88MHz (Later release)
B1 = 136-174MHz
C0 = 174-225MHz (Later release)
D1 = 216-266MHz (Later release)
H5 = 400-470MHz
H6 = 450-530MHz
H7 = 450-520MHz
TBBcde
e = other compliance attributes
A= 25W, level 1 digital architecture
B= 35W-50W
C= 25W, level 2 digital architecture
D= 35W-50W, level 2 digital architecture
E= 25W, level 3 digital architecture
F= 35W-50W, level 3 digital architecture