User's Manual
Table Of Contents
- Specifications Manual
- Tait Contact Information
- Contents
- Preface
- 1 System Specifications
- Supply
- Power Consumption @ 13.8 VDC
- Power Consumption Band B1, 25 W*
- Power Consumption Band B1, 50 W*
- Power Consumption Band H5, 25 W*
- Power Consumption Band H5, 40 W*
- Power Consumption Band H6, 25 W*
- Power Consumption Band H7, 40 W*
- Transmitting into 5:1 VSWR*
- Channel Data
- Environmental
- Physical
- Isolation
- RF Compliance
- EMC Compliance
- Environmental Compliance
- Safety Compliance
- General
- 2 Receiver Specifications
- 3 Transmitter Specifications
18 Receiver Specifications TB7100 Specifications Manual
© Tait Electronics Limited May 2005
Ultimate Signal-to-Noise Ratio*
NBFM
MBFM
WBFM
*Max RF level –47 dBm (EIA)
40 dB
41 dB
43 dB
Selectivity
Narrow Bandwidth
Mid Bandwidth
Wide Bandwidth
Signal Displacement Bandwidth > 40% of the rated system deviation (EIA 603B)
Spurious Response Attenuation ≥ 73 dB (ETSI)
*AGC switched off in H band Receiver
Intermodulation 3rd order immunity*
*Unwanted signals spaced at least 25kHz and 50kHz
away
>70 dB (ETSI)
Blocking Rejection (Blocking Ratio)
1 – 10 MHz ≥84 dB (ETSI)
Co-channel Rejection
Narrow Bandwidth
Mid Bandwidth
Wide Bandwidth
– 12 dB
– 8 dB
– 8 dB
Amplitude Characteristic*
*RF Input Level –107 dBm to –13 dBm
≤ 3 dB (ETSI)
Radiated Spurious Emissions
Transmit
Radiated
Standby
Conducted
Radiated
Transmit and Operating extremes*
*(AS4295)
< – 36 dBm EIRP to 1 GHz
< – 30 dBm 1 GHz to 4 GHz
< – 57 dBm 9 kHz to 1GHz
< – 47 dBm 1GHz to 12.75 GHz
< – 57 dBm EIRP to 1 GHz
< – 47 dBm EIRP 1 GHz to 4 GHz
< – 30 dBm 9 kHz to 2.9 GHz
Receiver RF Section (Continued)
ETS 136 MHz to
174 MHz
ETS 175 MHz to
530 MHz
68 dB
75 dB
80 dB
68 dB
73 dB
75 dB