User's Manual

28 Operating Controls TB8100 Installation and Operation Manual
© Tait Electronics Limited March 2005
3.1 Control Panel
3.1.1 Standard Control Panel
The operating controls on the standard control panel allow some manual
control of one or two
1
base stations in a TB8100 BSS. These controls and
their associated LED indicators are identified in Figure 3.1 below, and their
functions are explained in the paragraphs which follow. Refer to
“Connection” on page 99 for information on the connectors located on the
control panel.
Speaker Volume Controls the volume of the speaker mounted behind the control panel.
Rotate clockwise to increase the volume, and anticlockwise to decrease the
volume.
1. Control of two base stations will be available in a future release.
Figure 3.1 Operating controls on the standard control panel
b
speaker volume
f
power LED
c
speaker button and LED
g
carrier button and transmit LED
d
receive LED
h
alarm LED
e
speaker
i
microphone channel button and LEDs
controls for base station 1 (reciter 1)
or single base station
c
d
f
g
h
i
h
g
e
d
c
b
controls for base station 2 (reciter 2)
(future release)