User's Manual

TB8100 Installation and Operation Manual Installation 71

5.2.2 Antenna Load

The TB8100 BSS equipment has been designed to operate safely under a

wide range of antenna loading conditions. However, we strongly

recommend that the transmitter should always be operated with a suitable

load to prevent damage to the transmitter output power stage.

5.2.3 Equipment Grounding

To ensure safe operation the TB8100 BSS equipment must be correctly

grounded as described in these installation instructions.

5.2.4 Installation and Servicing Personnel

The TB8100 BSS should be installed and serviced only by qualified

personnel.

5.3 Regulatory Information

5.3.1 Distress Frequencies

The 406 to 406.1MHz frequency range is reserved worldwide for use by

Distress Beacons. Do not program transmitters to operate in this frequency

range.

5.3.2 FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject

to the condition that this device does not cause harmful interference.

5.3.3 Unauthorised Modifications

Any modifications you make to this equipment which are not authorised by

Tait Electronics Ltd may invalidate your compliance authority’s approval to

operate the equipment.

1. Refer to the TB8100 Specifications Manual for more information on the compliance standards to

which the TB8100 BSS equipment has been tested and approved.