User's Manual

Table Of Contents

TB8100 Calibration Kit User’s Manual Preface iii

Preface

Welcome to the TB8100 Calibration Kit User’s Manual. This manual provides

you with information about the Tait TB8100 Calibration Kit in PDF format.

You can view it online or print it if you want a paper copy. It describes how to

use Version 02.05 of the Calibration Kit.

Enquiries and Comments

Any enquiries regarding this manual as well as any comments, suggestions and

notifications of errors should be sent to support@taitworld.com, or addressed

to the Support Group Manager, Tait Electronics Limited, PO Box 1645

Christchurch, New Zealand.

Updates of Manual and Equipment

In the interests of improving the performance, reliability or servicing of the

equipment, Tait Electronics Limited reserves the right to update the equipment

or this manual or both without prior notice.

All information contained in this manual is the property of Tait Electronics

Limited. All rights are reserved. This manual may not, in whole or in part, be

copied, photocopied, reproduced, translated, stored, or reduced to any

electronic medium or machine-readable form, without prior written

permission from Tait Electronics Limited. All trade names referenced are the

service mark, trademark or registered trademark of the respective

manufacturers.

Disclaimer

There are no warranties extended or granted by this manual. Tait Electronics

Limited accepts no responsibility for damage arising from use of the information

contained in the manual or of the equipment and software it describes. It is the

responsibility of the user to ensure that use of such information, equipment and

software complies with the laws, rules and regulations of the applicable

jurisdictions.

Typographical Conventions

‘File > Exit’ means ‘click File on the menu bar, then select Exit’.

Associated Documentation

■ Online Help. The Calibration Kit also has online Help. It contains more or

less the same information as this manual. To view it, start the Calibration

Kit, then press F1 or click the Help icon on the toolbar. If you are in a dialog

box, click the Help button.

■ TB8100 Installation and Operation Manual.

■ TB8100 Service Manual (service centers only). A glossary of terms is available

in this manual.

■ TN-778 The TB8100 Calibration and Test Unit.

For additional items, see the TB8100 Installation and Operation Manual and

the TB8100 Service Kit User’s Manual or online Help.