User's Manual

104 Connection TB8100 Installation and Operation Manual
© Tait Electronics Limited March 2005
Figure 7.5 Single 5W or 50W 12V PA base station inputs and outputs - rear view
b
RS-232 connector
g
Power Saving control input
c
external reference frequency input
h
RF input (from antenna)
d
auxiliary DC input for system interface
i
TaitNet system interface connector
e
RF output (to antenna)
j
subrack ground connector
f
12VDC input
c
d
fhi
PA
reciter
b
j
e
g
reciter shown with TaitNet RS-232
system interface board
Figure 7.6 Standard control panel inputs and outputs
b
DC outputs for fans mounted on front panel;
also used for fan rotation detectors (if fitted)
d
RS-232 programming port
c
microphone connector
b
c
d