User's Manual

110 Connection TB8100 Installation and Operation Manual
© Tait Electronics Limited March 2005
The DC output from the PMU is 13.65VDC, 27.3VDC, or 54.6VDC
(depending on the model). Although this power output is isolated, the
negative side of the supply is grounded on the system interface board to give
a +V output.
Auxiliary DC Power
Supply Connections
Figure 7.11 below shows the standard Tait auxiliary DC power cables
available. Details of the individual connector types are also provided in case
you want to make up your own cables.
Pin Description Links
1 +V input
2ground
3 +V input
4ground
2-way connector - external view
1
2
3
4
12
4-way connector - external view
Figure 7.11 Auxiliary DC power cables
b
2x2-way Molex 43025-0400/
crimp socket 43030-0001 female
d
Phoenix MVSTBR2.5HC/2-ST/5.08
female
c
2x4-way Molex 43025-0800/
crimp socket 43030-0001 female
e
2x1-way Molex 43025-0200/
crimp socket 43030-0001 female
b
b
b
b
b
b
c
c
d
d
219-02895-00
(was TBA2241)
219-02896-00
(was TBA2242)
TBA2241
TBA2242
as sold up to
August 2004
as sold from August
2004 onwards
d
d
e
e
e
TBA2243
TBA2244
for use with the TaitNet RS-232 system interface
board, and all other boards made after March 2005
Obsolete
Current