User's Manual
Table Of Contents
- Specifications Manual
- Tait Contact Information
- Contents
- Preface
- 1 System Specifications
- 1.1 AC Input
- Transmit Power and Current Consumption - 240VAC Input
- Transmit Power and Current Consumption - 110VAC Input
- Transmit Power and Current Consumption - AC Input Voltage Extremes
- 1.2 12.5VDC Input
- Transmit Power and Current Consumption - 12.5VDC Input
- Transmit Power and Current Consumption - DC Input Voltage Extremes
- Receive Power and Current Consumption
- 1.3 24VDC Input
- Transmit Power and Current Consumption - 24VDC Input
- Transmit Power and Current Consumption - DC Input Voltage Extremes
- Receive Power and Current Consumption
- 1.4 48VDC Input
- Transmit Power and Current Consumption - 48VDC Input
- Transmit Power and Current Consumption - DC Input Voltage Extremes
- Receive Power and Current Consumption
- 1.5 Miscellaneous
- Dimensions and Weight
- Isolation
- 2 Reciter Specifications
- General
- Receiver RF Section
- Receiver Audio Section - General
- Receiver Audio Section - CTCSS
- Receiver Audio Section - Gating Operation
- Exciter RF Section
- Exciter Audio Section - Inputs
- Exciter Audio Section - Modulation Characteristics
- Exciter Audio Section - CTCSS
- External Reference Input
- Compliance Standards
- 3 Power Amplifier and Transmitter Specifications
- 4 Power Management Unit Specifications
TB8100 Specifications Manual Power Management Unit Specifications 45
© Tait Electronics Limited October 2004
DC Input - 12VDC*
Connector Type
Connector Current Rating
Flexible Wire Size
Flexible Wire Cross Section
DC Input - 24VDC*
Connector Type
Connector Current Rating
Flexible Wire Size
Flexible Wire Cross Section
DC Input - 48VDC*
Connector Type
Connector Current Rating
Flexible Wire Size
Flexible Wire Cross Section
*battery
M6 screw into threaded fitting on bus bar
50A
2AWG**
35mm
2
**
M6 screw into threaded fitting on bus bar
25A
5AWG**
16mm
2
**
M6 screw into threaded fitting on bus bar
12A
8AWG**
8mm
2
**
** for a length of 1.5m to 2m (5ft to 6.5ft) (typical); the DC
input leads should be of a suitable gauge to ensure less than
0.2V drop at maximum load over the required length of lead
DC Output - 28V High Current for PA
Connector Type
Connector Current Rating
Flexible Wire Size
Phoenix MVSTBR2.5HC/2-ST/5.08 female
16A
11AWG
DC Output - 28V Low Current for Reciter
Connector Type
Connector Current Rating
Flexible Wire Size
2x4-way Molex 43025-0800/crimp socket 43030-0001
female
3A
20AWG
DC Output - Low Current/Battery Charger
(from optional auxiliary power supply)
Connector Type
Connector Current Rating
Flexible Wire Size
Phoenix MVSTBR2.5HC/2-ST/5.08 female
3A to 16A
20AWG to 11AWG
Connections (Continued)